Fiber Laser Cutting Machine

• Designed For Low Energy Consumption: Thanks to the advantages coming from the FL3015 design, it provides up to 35% energy savings compared to its peers. 
• LED Lighting: The internal and external lights that are continuously open on the machine are made with low consumption and long life LEDs. Another measure taken to reduce overall electricity consumption.
• Gas Saving With Economic Mode Option: There are two modes in the program, economical and fast mode. The fast mode focuses on the shortest cutting time, while the economical mode closes the cutting gas to avoid unnecessary gas delivery in idle movements. Thus, the most economical cutting can be achieved.
• Easy To Use Gui: Machine use is facilitated by the use of batch commands, which significantly shortens the time spent on the program. It is quite easy to adapt the program to many languages and switch between them.
• 6 Cell Effective Vacuum System: Cutting table is divided into 6 cell vacuum regions and the cell near the laser head is opened producing a strong suction in the required region. The vacuum cells are opened immediately when the head reaches the relevant cell, and the vacuum of the passing cell is closed with some delay.

• Wide Language Support: Many languages are supported in the program and language can be switched between.
• Handwheel: There is a hand wheel for precise axis motion settings on the machine. It is very useful when precise positioning is required to remove small cuts from remaining portions of used metal sheets.
• Automatic Cutting Parts Recognition, Find, And Drawing: With the help of the sensors on the cutting head, the starting point, angle of the placed part on the pallet are found easily and quickly
• Restart Cutting From Last Point: If the machine is stopped or paused due to any reason, the cutting from the desired point can be started again.
• Operation With The Designed Cad / Cam Program: The machine can be easily integrated into one of the CAD / CAM programs Metalix, Lantek, Radan or similar that the customer can choose according to the request

• Protecting The Cutting Head: If the cutting head is struck by a piece or palette, or if it is about to struck, the machine is paused immediately and the cutting head is prevented from being damaged by impact. 
• Protective Glasses: To prevent damage due to laser beam reflection, the windows on the front doors are made of laser obstructing materia
• Emergency Stops: There are 7 emergency stop buttons on the machine, 1 on the pallet changer, 1 on the laser unit and 1 on the hand wheel. If any of these are pressed, the current movement and the laser light will pause. After the reset process, operations can resume where they were left.
• Laser Safety Barriers: Protective laser barriers are used to prevent injury in case someone enters the restricted area during pallet change. The pallet stops immediately if someone crosses the laser barriers. The pallet change operation can be continued in the desired direction either inside or outside the machine once the obstruction is removed and reset button is pressed.

• Remote Connection On The Internet: If the machine is connected to the internet in an emergency or necessary situations, all kinds of information related with malfunction can be viewed remotely. Remote service engineers can find the cause of error, alarm history and change parameters if necessary. Any kind of program update on the system can be performed via internet.
• Fast Service Team: Qualified service engineers solve any problem in shortest possible time

Available laser power options 1KW – 2KW – 3KW – 4KW – 5KW – 6KW – 8KW. Legend 3015-S is a unique machine with a very low energy consumption and a very fast cutting capacity, l in addition to a minimum maintenance cost. The Lazer Legend 3015-S machine has high productivity and superior quality standards. The chip collection covers open and close according to the position of the cutting head. At the same time, it ensures that there will be no exhaust fumes or smoke in the work environment. The toggle table system is designed to increase workflow, facilitate material placement, and reduce part discharge time.

The angle of the plate and its corner are automatically found by using the plate 3-point detection method. Fiber lasers are inherently made for maintenance-free production. The importance lies in the life of the diode which lasts approximately 100,000 hours.

DENER MAK??NA, was established in 1974, in Kayseri / TURKEY. It has been manufacturing sheet metal working machines like Fiber Laser Cutting, Servo Electric Press Brake, Ball Screw Press Brake, Hydraulic Press Brakes, Hybrid Press Brake, NC - CNC Hydraulic Shears and Plasma Cutting machines

Dener Makina’s production facilities are located in the industrial and Freezone Area in Kayseri. Since it’s beginning, Dener has the philosophy of production with the best quality and latest technology. It crowns this with the ISO 9001 Quality Management System and following European Safety Standards. Dener Makina is a leading Turkish Brand in Sheet Metal Working Machinery. It has qualified workmanship and a complete machinery manufacturing facility in it’s 30.000 m2 closed area. Today, Dener machines are working all around the world.

Our New Approach To Laser Cutting Machines:

• Our new design model is far better than the conventional design. The Y bridge hangs from the X bridge. This implementation allows the laser head to be more dynamic with much higher acceleration. In this way we eliminated the requirement of double motors to drive the Y bridge. A big X axis motor is placed in the middle of Y bridge thus allowing X axis motion to be driven by a single servo motor.

• The new design has a considerable narrower width. The palette changer unit is placed near the machine and the laser unit is placed inside the machine, thus allowing the machine to fit into a far smaller area in comparison to conventional machines

• Installation and implementation duration is fairly short since the electric board, laser unit, pneumatic board and all connections are implemented on the main unit. This new approach has considerably decreased the length of the machine and allows easy transportation of all machine parts including palette in a single rigid container

• Wide doors on both sides of the machine allow easy access to all parts of the machine. Thus, service and maintenance work can be easily performed. Automatic oiling is performed in rack and linear rail system. The automatic oiling system eliminates the need for manual oiling procedure which was supposed to be performed by the operator.

• Thanks to the design, the X axis motion is performed with a single servo motor which reduces frictional losses and the mass of the Y axis is fairly reduced. The new machine is 35% more efficient than its conventional counterpart